Custom Machining

Centerposts

Say you want to put an Evo front end on your old Ironhead, there is just one little problem, the centerpost on the old Ironhead is either 7/8" or 15/16" and the Evo centerpost is 1". The two things just don't quite fit together. Here is the solution. Send me the triple tree off of the Evo XL front end you want to use, I will press out the center post and machine it to fit your Ironhead frame. The finished set up will use the roller bearings and bearing cups. If you already have the roller bearing set up, just machining the centerpost will run you $75.00, if you need the bearings and the cups the entire job will run you $125.00 plus $12.00 USPS Priority Mail shipping.